Changing a pool light bulb

Just how many swimmers will it take to alter a pool light bulb? It may seem like the start of a terrible punchline. Nevertheless, in case you have already discovered yourself with a burnt out light bulb in the swimming pool, it may be one thing you have thought about. Some pool owners will only call an expert to help make the switch. After all the bulb is in there since the pool contractor installed it. But with a bit of know-how, this's a thing only about anybody is able to manage themselves. Continue reading to discover the best way to easily change a light bulb for an in-ground pool.



Step one: Assemble Supplies and tools Before getting going, it is better to collect anything you will need in a single spot. Be sure you have an alternative swimming pool light bulb invested in and completely ready to set up. You may need brand new washers and screws if symptoms of corrosion are existing. It is suggested that additionally, you change the lens gasket, that will probably be cracked, crimped or even displaying signs of wear.

When you are not certain which type of light you've, you are able to typically find the info on the rear on the casing, which we will remove from the swimming pool in phase three. If absolutely no sticker occurs or maybe the info is unreadable, you are able to in addition look for a part number on the facial skin ring and lens or attempt to find various other specs imprinted on the bulb itself. This information is going to be useful in purchasing the proper components.

f:id:Harnardta:20190330010308j:plain

Along with the bought supplies, you will also need:

  • A few smooth cloths or towels
  • A Phillips head screwdriver
  • A flathead screwdriver
  • A voltage tester Last, but surely not least, it's strongly encouraged you have an assistant contained in case of crisis.

 

Step two: Turn off Electricity To start, find the circuit board for the pool of yours, and also switch off of any breaker switches which limit the pool lights. Then check the energy is really off. Flip the standard on/off wall structure switch for the lighting fixtures to make certain there is no energy operating throughout the circuit. You may be ready to appear towards the pool lighting for reference, but this can solely be successful in case you still need a different performance light in the swimming pool. At this time, a non-contact voltage tester is going to come in handy. Place the tester against the light switch while flipping it all and on to determine whether electrical energy is detected.

Use Extreme CAUTION! Changing the light bulb in your swimming pool brings the danger of electric shock. As with most potentially deadly scenarios, it is crucial that you recognize all safety precautions prior to getting started. If in doubt, find the assistance of a licensed professional.

Step three: Remove Light From Pool Most pool lamps have one Phillips head screw securing the gentle housing on the swimming pool. Get rid of that screw, work with your flathead screwdriver between the swimming pool wall structure and also the tips of the gentle housing to lightly work it loose from the niche or the casing within the structure. Based on the level of your light, you may be ready to accomplish this from the advantage of the swimming pool without being in the water.

Right now there probably will be adequate extra wire to attain the swimming pool ledge, but pay attention to just how it is situated inside the structure. You will have to change it in a similar manner whenever you reinstall the casing, otherwise, it might not fit in correctly. Many lights are going to have the cable gently wrapped all around the rear on the casing. As soon as the light cover is freed, established it on a towel at the advantage of the pool. The towel not only helps absorb extra water, though additionally, it inhibits the lens from busting or scratching.

Step four: Disassemble Light Housing Carefully remove some screws or perhaps clamps that keep the facial skin ring, gasket, and lens on the housing. Examine the screws and such for clues of corrosion, and change them if needed. If any water leaked into the casing during removal of the lens as well as a gasket, dry it all perfectly with a soft cloth or a towel. Next, making use of a towel for hold, very carefully unscrew and also eliminate the outdated light bulb from the casing. It is likewise a good option to carefully remove any residue from the existing gasket with a damp rag. Be sure entire construction is dry and clean before you move.

Step five: Replace Reassemble and Bulb Light Housing Gently screw the new light bulb into position, but be very careful to not over tighten it. Use the brand new gasket within the lens, then pour the lens and deal with the band back onto the casing. Then, insert and firm up the screws (or the clamp as well as screw combination) which keep the facial skin band onto the housing.

When prime, submerge the light housing in pool water to check it. A couple of little bubbles are absolutely nothing to be alarmed about, but a constant stream of bubbles from within the gasket will signify a leak which has been resolved. If this occurs, disassemble the gentle housing once again, drying it off completely, and also ensure a tight seal is created when reinserting the screws across the face ring.

If desired, you are able to temporarily switch the power back on to check the brand new light before going back the housing on the market within the structure. Pool lights are not meant to be switched on outside of the swimming pool, so complete test as fast as you possibly can to stay away from harm to the light of yours. Absolutely no more than a single or perhaps 2 seconds is recommended. As a safety measure, be sure the energy is switched off once again before proceeding to another step.

f:id:Harnardta:20190330010243j:plain

Step six: Return Light to pool wrap the light 's power cord around the rear of the casing (or as you located it originally) so it fits back into the niche quickly. Go back the light housing on the market or maybe casing within the swimming pool wall structure, and secure it with the structure together with the screw which was eliminated in phase three. Lastly, switch the circuit board to the "on" position, and go on enjoying the advantages of an illuminated pool!